Showing 17–32 of 32 results
The Screw Long Boring Shaft is used in combination with a cutter to create a mortise pocket for locks up to 6" deep....
More Details Add to cart
The Screw Long Drill Adapter is used for door coring and installation of electric cables through wooden doors from lock to hinge. Use in ...
More Details Add to cart
The Offset Drill Adapter has a side sliding shaft housing, so that mortise hinges and strikes can be cut off-center. Compatible with doors ...
More Details Add to cart
The 1" (25.4mm) plunging cutter is used with the Mortise Lock Jig (INJIGC-MORT) to cut accurate mortise pockets in wood doors. Ideal for ...
More Details Add to cart
The 11/16" (17.5mm) plunging cutter is used with the Mortise Lock Jig (INJIGC-MORT) to cut accurate mortise pockets in wood doors. Ideal ...
More Details Add to cart
The 29/32" (23.0mm) plunging cutter is used with the Mortise Lock Jig (INJIGC-MORT) to cut accurate mortise pockets in wood doors. Ideal ...
More Details Add to cart
The Short Boring Shaft is used in combination with a cutter to create a mortise pocket for locks up to 3-1/2" deep....
More Details Add to cart
The 1" (25.4mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The length ...
More Details Add to cart
The 1-1/16" (27.0mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The ...
More Details Add to cart
The 1 1/4" (31.8mm) Wood Bore Cutter is to be used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. ...
More Details Add to cart
The 11/16" (17.5mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The ...
More Details Add to cart
The 13/16" (20.6mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The ...
More Details Add to cart
The 15/16" (23.8mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The ...
More Details Add to cart
The 3/4" (19.0mm) Wood Bore Cutter is used with the Mortise Lock Jig (INJIG-MORT) to cut accurate mortise pockets in wood doors. The length ...
More Details Add to cart